Simple or complex
Most units come with 2 channels; Channel A and Channel B.
Usually the intensities of each channel is controlled independently, but other settings like the Mode, Rate, or Feel are identical.
Each Channel has two leads, a hot and a ground, aka positive/negative, red/black, yellow/black.
The simplest set up is a single channel with two uni-polar electrodes. These can be loops, TENS pads, or inserted probe (anal).
Alternatively, you can have a single channel with both leads connected to a bi-polar electrode. These are usually inserted probes or clamps with two isolated leads. I have seen bi-polar nipple clamps, but I am never interested in using any estim above the waist. I have used a bipolar anal plug.
All bi-polar electrodes can also be used as a uni-polar electrode just by combining the leads together.
So, a typical set up can be Channel A with two uni-polar loops on your cock, and channel B with a bi-polar probe in your ass.
Another alternative is a tri-phasic setup. The grounds from both Channel A and B are combined into a common ground, and then the two hot leads are attached to two uni-polar electrodes.
As an example, I use one large TENS pad between my balls and anus (along the underside of my prostate) that acts as a common ground, and then channel A hot to a loop just under the glands (head), and channel B hot to a loop at the base of the shaft.
Have fun and keep experimenting with setups and different types of electrodes. Eventually, you will find what works for you.
Most units come with 2 channels; Channel A and Channel B.
Usually the intensities of each channel is controlled independently, but other settings like the Mode, Rate, or Feel are identical.
Each Channel has two leads, a hot and a ground, aka positive/negative, red/black, yellow/black.
The simplest set up is a single channel with two uni-polar electrodes. These can be loops, TENS pads, or inserted probe (anal).
Alternatively, you can have a single channel with both leads connected to a bi-polar electrode. These are usually inserted probes or clamps with two isolated leads. I have seen bi-polar nipple clamps, but I am never interested in using any estim above the waist. I have used a bipolar anal plug.
All bi-polar electrodes can also be used as a uni-polar electrode just by combining the leads together.
So, a typical set up can be Channel A with two uni-polar loops on your cock, and channel B with a bi-polar probe in your ass.
Another alternative is a tri-phasic setup. The grounds from both Channel A and B are combined into a common ground, and then the two hot leads are attached to two uni-polar electrodes.
As an example, I use one large TENS pad between my balls and anus (along the underside of my prostate) that acts as a common ground, and then channel A hot to a loop just under the glands (head), and channel B hot to a loop at the base of the shaft.
Have fun and keep experimenting with setups and different types of electrodes. Eventually, you will find what works for you.
Comments
Post a Comment